You Searched For: Overhead+Stirrers


672  results were found

SearchResultCount:"672"

Sort Results

List View Easy View (new)

Rate These Search Results

Supplier: Bohlender
Description: Stirrer shafts made of PTFE-jacketed stainless steel and the propeller completely made of PTFE.

Supplier: Bohlender
Description: Stirrer shafts made of PTFE-jacketed stainless steel and the two paddles arranged crosswise at 90° completely made of PTFE.

Supplier: Bohlender
Description: Stirrer shafts made of PTFE-jacketed stainless steel and the impeller completely made of PTFE with three blades bent backwards.

Supplier: KARTELL
Description: Fit all standard button tip stirring shafts. 'Long groove' keyhole (Ø 9 mm) provides easy insertion into flask neck and proper position for stirring action. Can be used continuously at temperatures up to 250 °C and, for short intervals, to 300 °C.

Supplier: Bohlender
Description: Stirrer shafts made of PTFE-jacketed stainless steel with fused lower end.

Supplier: Bohlender
Description: KPG stirrer shafts made of borosilicate glass, tiltable moon-shaped stirrer blade with angular groove and clamping bolts completely made of PTFE.

Supplier: COWIE
Description: PTFE. Blades fit PTFE stirring shaft; hole Ø 6,5 mm, 3,2 mm thick. Inert and non-scratch. The smooth surface prevents contamination and makes cleaning easier.

Supplier: Bohlender
Description: Stirrer shafts made of PTFE-jacketed stainless steel and the blade/paddle completely made of PTFE.

Supplier: Bohlender
Description: Stirrer shafts made of PTFE-jacketed stainless steel and the fan shaped stirring unit completely made of PTFE.

Supplier: COWIE
Description: Stirring shafts with a retreat angle of 30°.

Supplier: Bohlender
Description: KPG stirrer shafts with double pivot made of ground and polished borosilicate glass, tiltable moon-shaped stirrer blade with double-sided groove completely made of PTFE.

Supplier: Brand
Description: Magnetic stirring bar retriever, Stirring Tools, Length: 250 mm

Supplier: COWIE
Description: Stirrer guide features composite PTFE/PEEK seal and a glass ball-bearing for rigidity and smoothness of operation.

Supplier: Bohlender
Description: Combination of borosilicate glass piece with ground joint, an interior PTFE shaft guide with integrated special gasket and a GL screw cap made
of polyphenylene sulphide.

Supplier: Bohlender
Description: Stirrer shafts made of PTFE-jacketed stainless steel, two each tilting half-moon stirrer blades with double-sided groove and access for the stirrer shaft completely made of PTFE.

Supplier: Bohlender
Description: Stirring Tools, BOLA, Shaft, propeller, with three 45° angled blades, PTFE, Stirrer Ø: 140 mm, Shaft Ø: 10 mm, Shaft length: 600 mm

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR at sales@sg.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +65 6505 0760.
97 - 112 of 672
no targeter for Bottom