You Searched For: Reaction Vessel Lids


271  results were found

Sort Results

List View Easy View (new)
SearchResultCount:"271"
Description: Acetal polymer. Cassette design is similar to that of the M509 model but specially designed to hold biopsy specimens.
Catalog Number: SIMPM510-8
UOM: 1 * 500 items
Supplier Article Number:: M510-8
Supplier: Simport Scientific


Description: Made from high density polymer. These cassettes, with lids, keep specimens safe whilst submerged in liquid.
Catalog Number: SIMPM505-8
UOM: 1 * 1.500 items
Supplier Article Number:: M505-8
Supplier: Simport Scientific


Description: These disposable biopsy cassettes are designed to hold biopsy specimens during the embedding process. They are also designed as a storage file.
Catalog Number: SIMPM506-8
UOM: 1 * 1.500 items
Supplier Article Number:: M506-8
Supplier: Simport Scientific


Description: These cassettes are moulded from acetal and keep specimens safely submerged in liquid, and are resistant to the chemical action of most histological solvents.
Catalog Number: SIMPM525-8T
UOM: 1 * 1.000 items
Supplier Article Number:: M525-8T
Supplier: Simport Scientific


Description: Cassette design is similar to that of the M507 model but smaller, and with a lid that does not exceed the dimensions of the cassette. Made of acetal polymer.
Catalog Number: SIMPM509-8
UOM: 1 * 500 items
Supplier Article Number:: M509-8
Supplier: Simport Scientific


Description: Cassette design is similar to that of the M509 model with a recessed lid, but with four compartments (each 13×13 mm). Made of acetal polymer.
Catalog Number: SIMPM511-8
UOM: 1 * 500 items
Supplier Article Number:: M511-8
Supplier: Simport Scientific


Description: The accu-jet® S pipette controller brings versatility and endurance to your team. It makes lab work simple, easy, and efficient, whether you work with cell cultures, in quality control or in a pharma lab.
Catalog Number: BRND26362
UOM: 1 * 1 items
Supplier Article Number:: 26362
Supplier: Brand

Environmentally Preferable


Description: Sintered glass filters have neutral properties with unfused edge and untreated surfaces. The hard sintering process makes the material resilient.
Catalog Number: SCOT251525508
UOM: 1 * 10 items
Supplier Article Number:: 251525508
Supplier: DWK Life Sciences


Description: To make a sampling procedure reproducible, it should always be carried out under the same conditions. For this purpose, the depth stop for samplers is a helpful accessory.
Catalog Number: BURK5317-0015
UOM: 1 * 1 items
Supplier Article Number:: 5317-0015
Supplier: BURKLE


Description: Makes any plastic or glass burette self-zeroing.
Catalog Number: NALG3645-2550
UOM: 1 * 1 items
Supplier Article Number:: 3645-2550
Supplier: Thermo Fisher Scientific

Environmentally Preferable


Description: Constructed from borosilicate glass, PTFE plunger tips and Kel-F® or PTFE Luer cones where applicable.
Catalog Number: SGEA009463
UOM: 1 * 1 items
Supplier Article Number:: 009463
Supplier: Trajan Scientific and Medical


Description: This glove consists of a cotton jersey liner with a liquid-proof natural rubber latex coating. The glove provides chemical protection and excellent thermal insulation either in hot (up to 250 °C) or cold (down to −20 °C) conditions.
Catalog Number: ANSE62-401/11
UOM: 1 * 6 PAIR
Supplier Article Number:: 62-401/11
Supplier: Ansell


Description: Acetal polymer. E-Z Load™ Histosette® II cassettes are designed for loading Micro Writer® and Shur/Mark® cassette labelling instruments in one simple operation. Supplied in stacks of 50 cassettes, no manual insertion, one cassette at a time, is required. Just load the stack in the magazine, cut and remove the holding tie and place in the labelling instrument ready for printing. Moulded from a special high density polymer, these cassettes keep specimens safely submerged in liquid and are totally resistant to the chemical action of histological solvents. The efficient flow-through slots maximise fluid exchange and ensure proper drainage. Available in non cytotoxic, non metallic colours. Anterior printing area is at a 45° angle, offering an unobstructed view of the writing surface and making the cassette perfectly suitable to be used with cassette labelling instruments. Two types of lids are available. The one-piece disposable plastic cover eliminates the need for reusable steel lids. It can be opened and closed as often as necessary and always relocks securely without danger of specimen loss.
Catalog Number: SIMPM486-3SL
UOM: 1 * 750 items
Supplier Article Number:: M486-3SL
Supplier: Simport Scientific


Description: Specifically designed to make collecting cells easier and more effective. Available with a choice of blade positions: scraper for use in flasks, or lifter for use in harvesting cells (especially stem cells) in dishes.
Catalog Number: VWRI734-2603
UOM: 1 * 100 items
Supplier: VWR Collection

Environmentally Preferable


Description: Constructed from borosilicate glass, PTFE plunger tips and Kel-F® or PTFE Luer cones where applicable.
Catalog Number: SGEA002455
UOM: 1 * 1 items
Supplier Article Number:: 002455
Supplier: Trajan Scientific and Medical


Description: Made of acetal polymer. Suitable for hoppers accepting plastic sleeves, these cassettes will load in cassette labeling instruments in one simple operation. Save time and money with these convenient stacks of 75 unique cassettes. No more manual insertion, one cassette at a time.
Catalog Number: SIMPM485-8SL
UOM: 1 * 750 items
Supplier Article Number:: M485-8SL
Supplier: Simport Scientific


1 - 16 of 271