You Searched For: Sulphur+Standards


5,989  results were found

SearchResultCount:"5989"

Sort Results

List View Easy View (new)

Rate These Search Results

Supplier: VWR Chemicals
Description: Sulphur Standard, 10 mg/L, VWR®, Sulphur, Matrix: H₂O, Application: ICP-MS standards
Supplier: VWR Chemicals
Description: (NH₄)₂SO₄ in H₂O.
Supplier: VWR Chemicals
Description: (NH₄)₂SO₄ in H₂O.
Supplier: VWR Chemicals
Description: Sulphur Standard, 1000 mg/L, VWR® AVS TITRINORM, Sulphur, Matrix: H₂O, Application: AAS standards
Supplier: Thermo Scientific
Description: Sulphur Standard, 1000 mg/L, Specpure®, Sulphur, Matrix: H₂O, Application: AAS standards
Catalog Number: (ALFA43869.18)
Supplier: Thermo Scientific
Supplier Article Number:: 43869.18
Description: Sulphur Standard, Standard for wear metal analysis, 1000 µg/g, Specpure®, Sulphur, Matrix: oil, Application: Oil based standards
UOM: 1 * 50 g

Catalog Number: (MACRH381-07)
Supplier: MACRON AVANTOR BRAND
Description: Sulphuric acid 2.0 N in aqueous solution, StandARd® volumetric solution, Macron Fine Chemicals™
UOM: 1 * 4 L

Supplier: VWR Chemicals
Description: Sulphuric acid 4 mol/l (8 N) in aqueous solution, AVS TITRINORM volumetric solution, for COD determination according to NF T 90-101 standard
Supplier: Avantor
Description: Standardized at 25°C against chemicals whose certification is traceable to NIST. Lot standardization value, accurate to +/- 1 part per 1000, provided on label.
Supplier: VWR Chemicals
Description: Sulphur CRMs are suitable for calibration, verification or for use in quality control procedures used for analysing sulphur content in petroleum products.
Supplier: Thermo Scientific
Description: Sulphur Standard, 1000 mg/L, Specpure®, Sulphur, Matrix: H₂O, Application: ICP standards
Supplier: VWR Chemicals
Description: Sulphur CRMs are suitable for calibration, verification or for use in quality control procedures used for analysing sulphur content in petroleum products.
Supplier: Thermo Scientific
Description: Sulphur Standard, 10000 mg/L, Specpure®, Sulphur, Matrix: H₂O, Application: ICP standards
Supplier: Avantor
Description: Standardized at 25°C against chemicals whose certification is traceable to NIST. Lot standardization value, accurate to +/- 1 part per 1000, provided on label.
Catalog Number: (ALFA43870.18)
Supplier: Thermo Scientific
Supplier Article Number:: 43870.18
Description: Sulphur Standard, Standard for wear metal analysis, 5000 µg/g, Specpure®, Sulphur, Matrix: Mineral oil, Application: Oil based standards
UOM: 1 * 50 g

Supplier: VWR Chemicals
Description: Sulphur CRMs are suitable for calibration, verification, or for use in quality control procedures used for analysing sulphur content in petroleum products.
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR at sales@sg.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +65 6505 0760.
1 - 16 of 5,989
no targeter for Bottom