Print…

You Searched For: PE/LDPE/HDPE Stoppers

Low density, high density, or standard plastic stoppers gently insert into vessels to provide a vacuum tight seal. The cost efficient alternatives do not require the preparative greasing like ground glass counterparts. Solid or hollow models may feature a gripping handle or rotating nuts for easy application and extraction. Available in different diameter sizes, the PE, LDPE, and HDPE stoppers selection promises to close any apparatus to keep contents unpolluted.

Low density, high density, or standard plastic stoppers gently insert into vessels to provide a vacuum tight seal. The cost efficient alternatives do not require the preparative greasing like ground glass counterparts. Solid or hollow models may feature a gripping handle or rotating nuts for easy application and extraction. Available in different diameter sizes, the PE, LDPE, and HDPE stoppers selection promises to close any apparatus to keep contents unpolluted.


32  results were found

Refine Results Sort by
SearchResultCount:"32"

Sort Results

List View Easy View (new)

Rate These Search Results

Image Unavailable-VWRI462-0585

VWR®, Drain Stoppers for VWB2 Water Baths

Catalog Number: (VWRI462-0585)
Supplier: VWR Collection
Description: Drain stoppers, VWR®
UOM: 1 * 5 items
Product Image-VWRU80079-874

VWR®, Stoppers for Chlorobutyl Serum and Lyophilisation

Supplier: VWR Collection
Description: These stoppers have a fluorocarbon film on the top and bottom. In addition, the enhanced lyophilisation stoppers are coated with a cross-linkable polydimethylsiloxane on the underside of the flange.

Product Image-VWRI212-0667

VWR®, Stoppers, PE

Supplier: VWR Collection
Description: Stopper for test tubes Ø 12 to 16 mm, polyethylene, with tongues.

Product Image-VWRI217-0214

VWR®, Stoppers for Standard Ground Joints

Supplier: VWR Collection
Description: Greaseless closure, which prevents ground joints from seizing. With inclined, circumferential sealing lips for better sealing and reduced risk of breakage. Easily detachable. With ergonomically shaped grip.

Product Image-SIMPT404-10N

Stoppers, flange plug caps

Supplier: Simport Scientific
Description: PE Plug type push-in caps and 2-position snap caps are made of polyethylene for test tubes with outside diameters of 12 or 17 mm. Dual position caps offer two possibilities: the closed but unsealed position where samples are maintained aerobic for microbiological procedures; and the fully sealed position where the cap is pushed tight to seal the tube for anaerobic use or for storage, transfer and centrifuge applications.

Product Image-SIMPT401-3DSPP

Push-in stoppers for tubes

Supplier: Simport Scientific
Description: HDPE. Fit tubes of 15 ml capacity and 17 mm Ø.

Product Image-GRANUWB-DS

Drain stoppers for SAP and JBN baths

Catalog Number: (GRANUWB-DS)
Supplier: GRANT INSTRUMENTS LTD.
Supplier Article Number:: UWB-DS
Description: Drain stoppers, recommended when using heat transfer beads, to prevent beads entering the drain hole.
UOM: 1 * 5 items
Product Image-BURK9760-1926

Stoppers for standard ground joints

Supplier: BÜRKLE
Description: Stopper made of PE, hollow with sealing rings and octagonal top.

Product Image-CORN7624-27

Stoppers, Standard Taper, HDPE, PYREX®

Supplier: Corning
Description: These PYREX® No.13 stoppers are made from linear HDPE and have closed bottoms to conform to Standard Taper stopper dimensions.

Certificates

Product Image-CORN7630-9

Stopper, PTFE, key-hole, color-coded, PYREX®

Supplier: Corning
Description: PTFE. Ideal for flasks that are grounded to [ST] stopper dimensions.

Certificates

Product Image-BOHLH937-07

Stoppers, PTFE

Supplier: Bohlender
Description: For closing ground joint parts. With ground joint and sealing rings on the outside; knurled or hexagonal grip. Compared with glass stoppers, they are easily removable and can be used without grease.

Product Image-SIMPT402-16G

Stoppers, press down, VacuCap®

Supplier: Simport Scientific
Description: Ideal closures for glass and plastic reagent, sample and culture tubes, LDPE.

Image Unavailable-KIML28160R-16

Stopper, HDPE, KIMBLE®

Supplier: KIMBLEKONTES
Description: HDPE, linear, ideal for flasks that are grounded to [ST] stopper dimensions.

Product Image-SIMPT403R

Stoppers, universal caps, FitsAll™

Supplier: Simport Scientific
Description: Designed for easy-on, easy-off use. Cap removal is simple and quick. FitsAll™ closure is ideal for recapping most 12 and 16 mm O.D. evacuated glass blood collection tubes. Flexible FitsAll™ closures protect from aerosols of highly infectious microorganisms. They guard samples against cross-contamination and laboratory work areas against infection and spillage. Precision molded from low-density polyethylene, FitsAll™ fits firmly on the tube. Not suitable for autoclaving.

Product Image-LENZ01401019

Stoppers for conical ground Joints, PE

Supplier: Lenz Laborglas GmbH & CO.KG
Description: <B>PE</B>, white with red cover plate and octagonal head.

Product Image-KART88318

Stoppers for test tubes

Catalog Number: (KART88318)
Supplier: KARTELL
Supplier Article Number:: 88318
Description: Stoppers for disposible tubes, PE.
UOM: 1 * 1.000 items
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR at sales@sg.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +65 6505 0760.
1 - 16 of 32
no targeter for Bottom