FreeZone® Triad™ Freeze drying system

Supplier: LABCONCO
794001050
LBCP794001050EA 77490 SGD
LBCP794001050
FreeZone® Triad™ Freeze drying system
Freeze Dryers
The FreeZone® Triad™ freeze drying system is an all inclusive bench top lyophiliser for 4 samples on the left side and stoppering tray dryer processing shelf. The processing shelf holds up to 441×3 ml serum bottles and the four valves hold samples in flasks, serum bottles or ampoules. Samples for both types of freeze drying can be run at once. The chamber pre-freezes samples to save money and time, eliminating the need for a separate freezer and product transfer.

  • Microprocessor controlled temperature programming from −55 to +50 °C during ramping and holding and −75 °C during pre-freezing
  • Alarm indicator for temperature and vacuum
  • ¹/₃ hp refrigeration systems cool to −85 °C for processing samples with low eutectic points
  • A hot gas defrost is also included with switch and automatic shut off when refrigerant reaches 65 °C or after 3 hours
  • Stainless steel condensate pan with drain hose

The Triad™ includes a pneumatic stoppering mechanism that inflates the diaphragm and lowers the stoppering tray above the shelf. No compressed gas is required.

Ordering information: Model requires: Vacuum pump with a displacement of at least 144 litres per minute,  0,002 mBar ultimate pressure, reverse IEC plug, and fitting suitable for ³/₄" I.Ø vacuum hose and freeze dry glassware, if not bulk freeze drying, which are not supplied with the dryer. Please order these separately. Please contact Avantor for further details.
Order Now

Learn more

About VWR

Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...

Learn more About VWR