You Searched For: LABCONCO


370  results were found

SearchResultCount:"370"

Sort Results

List View Easy View (new)

Rate These Search Results

Supplier: LABCONCO
Description: Purifier Logic+ Class II Type A2 Biosafety Cabinets are suitable for work with agents that require Biosafety Level 1, 2 or 3 containment.

Environmentally Preferable

Supplier: LABCONCO
Description: Protector premier hoods are suitable for general chemistry applications and also explosion-proof models are available for laboratories with potentially explosive/flammable atmospheres. Hoods are available with a built-in standard fiberglass blower, or an explosion-proof fiberglass blower, or without a blower (remote blower sold separately).

Environmentally Preferable

Supplier: LABCONCO
Description: These systems use vacuum along with heat and vortex motion to help speed evaporation and provide an alternative to traditional centrifugal evaporation methods. The systems may be used with a broad range of aggressive chemicals. Heat is supplied by a dry block heating system that, unlike water baths, adds no potential source of contamination and requires no maintenance.

Supplier: LABCONCO
Description: Distillation grid kit includes stainless steel rods, connectors, instruction sheet and drill template

Supplier: LABCONCO
Description: Basic Laboratory Hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required. Constructed of epoxy-coated steel, Basic Hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles.

Catalog Number: (LBCP2127602)
Supplier: LABCONCO
Supplier Article Number:: 2127602
Description: Kjeldahl distillation units are designed with mounting on a base cabinet or table. One-piece borosilicate glass connecting bulbs separate liquid from vapors prior to the vapors entering the condenser and effectively traps caustic mist that may carry over to the recovery solution and One-piece borosilicate glass delivery tubes with long necks, round bottoms and thick walls to help eliminate pressure fluctuations in the distillation phase.
UOM: 1 * 1 items


Catalog Number: (LBCP3768903)
Supplier: LABCONCO
Supplier Article Number:: 3768903
Description: Replacement prefilter, pleated paper. MERV 8 rating, 0,5 kg, 452×376×20,3 mm
UOM: 1 * 1 items


Catalog Number: (LBCP7701035)
Supplier: LABCONCO
Supplier Article Number:: 7701035
Description: The CentriVap micro IR vacuum concentrator has a very small footprint and therefore fits in tight spaces. It is ideal for small samples such as DNA and small throughput in molecular biology, proteomics, genomics, genetics, cell biology and drug discovery labs.
UOM: 1 * 1 items


Supplier: LABCONCO
Description: An efficient, automatic evaporator system which can be used with a broad range of aggressive chemicals. In RapidVap N₂ systems, a stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow-down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 or all 8 tube locations. Vortex motion and dry heat may also be applied to further accelerate processing.

Supplier: LABCONCO
Description: Weathercaps are constructed of strong, corrosion-resistant PVC.

Catalog Number: (LBCP7201800)
Supplier: LABCONCO
Supplier Article Number:: 7201800
Description: 8-port manifold, W×D×H: 218×218×399 mm
UOM: 1 * 1 items

Environmentally Preferable


Catalog Number: (LBCP5080065)
Supplier: LABCONCO
Supplier Article Number:: 5080065
Description: This combination glove box with fibreglass lining provides inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment.
UOM: 1 * 1 items


Catalog Number: (LBCP7587300)
Supplier: LABCONCO
Supplier Article Number:: 7587300
Description: Scroll Vacuum Pumps are low maintenence, corrosion resistent pumps that require no oil.
UOM: 1 * 1 items


Supplier: LABCONCO
Description: PTFE-coated aluminium block for 110 tubes Ø 13 mm, max. height 150 mm, For: Labconco RapidVap®

Catalog Number: (LBCP4882806)
Supplier: LABCONCO
Supplier Article Number:: 4882806
Description: Solid epoxy work surface, flat, no cupsink cutout, for 30 inch width laboratory hoods, 760×760×30 mm, 39 kg, For: Laboratory Hoods, Fiberglass 30
UOM: 1 * 1 items


Supplier: LABCONCO
Description: These glove boxes provides a leak-tight environment to perform work with contamination-sensitive materials under vacuum or in an inert environment.

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR at sales@sg.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +65 6505 0760.
1 - 16 of 370
no targeter for Bottom