HV plug valves provide an economical and flexible method of custom-building a fluid flow control system, from a simple on/off valve to a more complex multi-valve arrangement, using a combination of loop and distribution valves.
- Wetted paths are chemically inert PTFE and Kel-F® materials
- Valve position is controlled manually via a handle attached to the valve stem
- Valve can be chosen by selecting the proper flow path
The small valve body with its chemically inert flow path is ideally suited for low pressure applications. All HV Plug Valves allow you to select and interchange a wide variety of fittings, adapters and tubing, including male and female luers, FEP tubing assemblies, and adapters which thread directly into the valve providing an endless variety of valve configurations for any flow application. HV fittings and adapters are installed finger-tight (10 ounce inches) and provide a leak-tight seal tested to 100 psig.
The HV valve is physically the smallest manual valve and constitutes a basic unit for the control of fluids. It is ideal for low pressure applications; from a basic on/off flow to a four-way distribution system.
The HVP valve is essentially the same as the manual HV valve except the HVP can be mounted into panels allowing for custom installation into control panels or instruments.
HVX valves are physically the largest manual valves. A larger port internal diameter allows increased fluid flows even with moderately viscous fluids. It can be used free standing or panel-mounted using an optional locking nut. 6- and 8-port distribution and loop valves are available only in the HVX body style.
Thread depth: 5,6 mm
Threaded connection: 1/4-28