You Searched For: HAMILTON BONADUZ

Supplier: HAMILTON BONADUZ

Description: The compression fittings and adaptors are designed to connect Hamilton removable needle (RN) and knurled hub (KH) syringes to glass capillary tubing and PEEK tubing. The connectors can be combined in a variety of different configurations to meet most connection needs.

Catalog Number: (HAMI79803)

Supplier: HAMILTON BONADUZ

Supplier Article Number:: 79803

Description: RCX-30 carbohydrate analysis columns are designed for the isocratic or gradient separation of carbohydrates. When an isocratic method is used with a conductivity, refractive index, ultraviolet, or pulsed amperometric detector (PAD), mono and disaccharides such as glucose, fructose, sucrose and lactose can be quickly determined.

UOM: 1 * 1 items

Sale

Supplier: HAMILTON BONADUZ

Description: The 600 series syringes are a half stroke version of the original 700 series syringes. This series of syringes is ideal for dispensing volumes from 0,25 μl up to 5 μl. The 600 series is often used in applications that require one handed operation because of the short stroke length and the reinforced plunger.

Supplier: HAMILTON BONADUZ

Description: NR = Rheodyne needle
RNR = Replacement Rheodyne needle

Supplier: HAMILTON BONADUZ

Description: The 900 series syringe is the economical version of the 800 series syringe. This series of syringes is ideal for dispensing volumes from 0,5 μl up to 10 μl. The syringe holder is permanently attached to the syringe barrel. This reduces the initial cost of the syringe but eliminates the possibility of replacement components.

Supplier: HAMILTON BONADUZ

Description: Suitable for applications such as GC, TLC and micro pipetting. Manufactured according to the principle of dead volume by positive pressure. A tungsten piston is introduced into the syringe as far as the tip of the needle. Needle and piston are calibrated against each other and must be changed at the same time in the event of replacement.

Catalog Number: (HAMI84877)

Supplier: HAMILTON BONADUZ

Supplier Article Number:: 84877

Description: The 1800 series is the reinforced plunger version of the 1700 series syringe. Attached to the flange of the syringe is a removable blue syringe holder that prevents heat transfer, dispense inaccuracies and plunger blow outs. It also provides support to small volume plungers that are prone to bending during injection.

UOM: 1 * 1 items

Certificates Sale

Supplier: HAMILTON BONADUZ

Description: The needle points of these thin layer chromatography syringes are covered with a PTFE coating which reduces the surface tension between the needle and the liquid making it ideal for reproducible sample spotting.

Supplier: HAMILTON BONADUZ

Description: PRP-1 polymeric HPLC columns are designed for broad ranging uses, similar to C8 or C18 HPLC materials. They combine the best characteristics of silica-based and polymeric columns resulting in highly inert and long-lasting columns. These columns are ideal for applications that require a high degree of column to column and batch to batch consistency (quality assurance, clinical trials). Unlike C8 or C18 columns, PRP-1 has no stationary phase coating. Since there is no stationary phase to hydrolyse, the column maintains its performance characteristics longer than many C8 or C18 columns.

Catalog Number: (HAMI204880)

Supplier: HAMILTON BONADUZ

Supplier Article Number:: 204880

Description: This brushed stainless steel rack is used for clean and safe storage of syringes with plastic holder. A lip on the plastic holder protects the syringe against accidental touching and falling down. The distance of the plastic holder prevents the syringe from getting in contact with the metal plate.

UOM: 1 * 1 items

Sale

Catalog Number: (HAMI243515)

Supplier: HAMILTON BONADUZ

Supplier Article Number:: 243515

Description: Optical sensor caps H0, stainless steel 1,4435 and silicone, Electrode, Dissolved Oxygen

UOM: 1 * 1 items

Sale

Supplier: HAMILTON BONADUZ

Description: The 700 series syringe is the original hand-fitted Hamilton syringe. This series of syringes is ideal for dispensing volumes from 0,5 to 500 µl. The stainless steel plunger is manufactured to fit the glass barrel with a tolerance smaller than 100 millionths of an inch, resulting in unsurpassed syringe life. Each syringe is manufactured to achieve the highest level of accuracy and precision possible.

Catalog Number: (HAMI14725)

Supplier: HAMILTON BONADUZ

Supplier Article Number:: 14725

Description: Reproducibility adapter for series 702 through 1750 Microliter™, series 7000 Modified Microliter™ and series 1702 through 1750 Gastight® syringes

UOM: 1 * 1 items

Sale

Supplier: HAMILTON BONADUZ

Description: HV plug valves provide an economical and flexible method of custom-building a fluid flow control system, from a simple on/off valve to a more complex multi-valve arrangement, using a combination of loop and distribution valves.

Catalog Number: (HAMI80339)

Supplier: HAMILTON BONADUZ

Supplier Article Number:: 80339

Description: These GC syringes are suitable for Bruker Varian Chrompack autosamplers.

UOM: 1 * 1 items

Sale

Supplier: HAMILTON BONADUZ

Description: Kel-F® hub (KF) needles can be used with Luer Tip (LT) and PTFE Luer Lock (TLL) syringes and connectors. Custom lengths and point styles are available.