Print…

You Searched For: Centrifugal+Evaporators


1,342  results were found

Refine Results Sort by
SearchResultCount:"1342"

Sort Results

List View Easy View (new)

Rate These Search Results

Product Image-LBCP7900011

Vacuum evaporation systems, RapidVap®

Supplier: LABCONCO
Description: These systems use vacuum along with heat and vortex motion to help speed evaporation and provide an alternative to traditional centrifugal evaporation methods. The systems may be used with a broad range of aggressive chemicals. Heat is supplied by a dry block heating system that, unlike water baths, adds no potential source of contamination and requires no maintenance.

Product Image-LBCP7310034

Vacuum concentrators, refrigerated, CentriVap®

Supplier: LABCONCO
Description: The refrigerated CentriVap centrifugal concentrator is designed to rapidly concentrate multiple small heat-sensitive samples, such as RNA and proteins, using centrifugal force, vacuum and controlled temperature. The concentrator combines a refrigeration system that cools to −4 °C with a heater that warms to 100 °C to achieve the user's desired set point temperatures. With an epoxy-coated aluminum chamber.

Image Unavailable-EPPE5301000.067

Bench top concentrator, 5301

Catalog Number: (EPPE5301000.067)
Supplier: EPPENDORF
Supplier Article Number:: 5301000.067
Description: This concentrator is an easily upgradeable basic device which enables efficient and gentle vacuum concentration of samples. Optimal and rapid evaporation of your samples is made possible by innovative powerful heating technology.
UOM: 1 * 1 items
Image Unavailable-LBCP7871500

Accessories for centrifugal concentrators, bench top, CentriVap®

Catalog Number: (LBCP7871500)
Supplier: LABCONCO
Supplier Article Number:: 7871500
Description: Glass trap, 2550 ml, for use in FreeZone freeze dry units
UOM: 1 * 1 items
Image Unavailable-LBCP7812014

CentriVap® mobile systems

Supplier: LABCONCO
Description: Combine the separate concentrator and cold trap components into one space-saving console and include casters for portability from laboratory to laboratory. A 12 to 17 mm rotor and solvent trap are also included. The interior can accommodate a vacuum pump - the only additional component necessary to begin processing.

Product Image-LBCP7482200

Dry evaporation systems, N₂/48, RapidVap®

Catalog Number: (LBCP7482200)
Supplier: LABCONCO
Supplier Article Number:: 7482200
Description: This system uses nitrogen blow down, vortex motion and heat to speed evaporation of up to 48 small samples or eight 450 milliliter samples at once.
UOM: 1 * 1 items
Product Image-LBCP7910011

Evaporation system, RapidVap® N₂

Supplier: LABCONCO
Description: An efficient, automatic evaporator system which can be used with a broad range of aggressive chemicals. In RapidVap N₂ systems, a stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow-down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 or all 8 tube locations. Vortex motion and dry heat may also be applied to further accelerate processing.

Product Image-LBCP7320035

Dry evaporators, RapidVap® Vertex™ Dry

Supplier: LABCONCO
Description: This evaporator speeds evaporation of up to 50 samples at the same time using dry heat and nitrogen blow down. Unlike water bath heaters, the dry block heater requires less maintenance, no distilled water or additives, and adds no potential source of contamination.

Product Image-LBCP7701035

Vacuum concentrators, CentriVap® micro IR

Catalog Number: (LBCP7701035)
Supplier: LABCONCO
Supplier Article Number:: 7701035
Description: The CentriVap micro IR vacuum concentrator has a very small footprint and therefore fits in tight spaces. It is ideal for small samples such as DNA and small throughput in molecular biology, proteomics, genomics, genetics, cell biology and drug discovery labs.
UOM: 1 * 1 items
Product Image-LBCP7811035

Centrifugal Concentrators, Bench Top, CentriVap®

Supplier: LABCONCO
Description: CentriVap® vacuum concentrators are available in a range of configurations. The CentriVap® DNA model is supplied with a built-in 34 litres/min diaphragm pump, two 177 ml glass traps and a DNA rotor (60×1,5/2,0 and 72×0,5 ml). Model with glass lid is recommended for evaporation of solvents that are not compatible with acrylic (acetone, acetonitrile, ethanol, DMSO, etc.). The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, etc.).

Product Image-LBCP7315061

Centrifugal concentrators, complete systems and system packages, CentriVap®

Supplier: LABCONCO
Description: CentriVap® vacuum concentrators are available as complete systems or system packages. The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, and so on). Other models feature Heat Boost, which surrounds the chamber wall, to further speed evaporation of high boiling point solvents.

Product Image-CORN431488

Corning® Spin-X® UF Concentrators

Supplier: Corning
Description: These non sterile centrifugal concentrators offer a simple, one step procedure for concentrating or desalting proteins and other biomolecules with 90% or better recovery.

Certificates

Product Image-EPPE5305000.509

Bench top concentrator, Concentrator Plus™

Supplier: EPPENDORF
Description: This ergonomic, intuitive concentrator provides quick, efficient and gentle vacuum concentration of DNA/RNA, nucleotides, proteins and other liquid or wet samples. The coated lid provides superior chemical resistance against aggressive acids and organic solvents (e.g. TFA, DMSO).

Environmentally Preferable

Product Image-LBCP7548800

Accessories for vacuum concentrators, centriVap® micro IR

Supplier: LABCONCO
Description: Rotor for 24×1,5 ml microcentrifuge tubes, PTFE coated aluminium

Product Image-LBCP7812035

Mobile concentrator system, CentriVap®

Supplier: LABCONCO
Description: This mobile system with or without heat boost combines the separate vacuum concentrator and cold trap components into one space-saving console and include casters for portability from laboratory to laboratory. A 12 to 13 mm rotor and solvent trap are also included. The interior can accommodate a vacuum pump — the only additional component necessary to begin processing.

Product Image-LBCP7450701

Rotors and accessories for CentriVap® concentrators

Supplier: LABCONCO
Description: Hexagonal rotor, anodised aluminium, 132 holes for 1,5/2,0 ml microcentrifuge tubes, For: Labconco CentriVap®

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR at sales@sg.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +65 6505 0760.
1 - 16 of 1,342
no targeter for Bottom