You Searched For: HUPFER METALLWERKE

Supplier: VWR Collection

Description: Rack, Test tube, VWR®, Stainless steel test tube rack, holds maximum of 15 tubes. 6 litre stainless steel baths can accommodate 1 rack, Stainless steel, For tube Ø: 10 - 13 mm

Catalog Number: (GRANTS-DW)

Supplier: GRANT INSTRUMENTS

Supplier Article Number:: TS-DW

Description: The TS-DW has been designed for shaking and heating deep well plates. A multisystem principle used in the design of the thermoshaker allows it to operate as three independent devices: Incubator, plate shaker and thermoshaker. Ideal for use in life science applications, molecular biology, cell biology lab, cell lysis, DNA isolation and purification, sample preparation for PCR, pellet re-suspension, or any other method where many samples need mixing in deep well plates.

UOM: 1 * 1 items

Sale

Supplier: JULABO GmbH

Description: Ultra-low temperature refrigerated circulators for heating and cooling. The units are suitable for external temperature applications with simultaneous operation in the bath tank. The units provide particularly high heating and cooling capacities for rapid heating and cooling times even for large volume, external systems. FP models offer proportional cooling control to ensure energy saving performance and to reduce heat generation to the environment. Models with the designation W are water cooled. All models have handles and castors which allow easy transportation and drain ports for conveniently draining the bath fluid. The units offer an improved insulation to prevent ice formation and have a filling level display. Typical applications: Temperature control of jacketed reaction vessels, autoclaves, mini plant installations, kilo labs, freezing point determination, calibration at low temperatures and petroleum testing.

Supplier: DWK Life Sciences

Description: The DURAN® borosilicate glass 3.3, double-walled, wide mouth bottles GLS 80® incorporate an integral jacket that isolates the contents from the external environment. Heated or cooled liquids can be circulated through the jacket to control the temperature within a screw topped bottle. Double-walled bottles offer a sealable and more flexible alternative to open topped jacketed beakers.

Supplier: VWR Collection

Description: VWR’s Class II, Type A2 Biological Safety Cabinet protects laboratory staff, the environment and sensitve work processes in which biological agents are applied. The cabinet offers a high level of contamination protection, based on 2 advanced HEPA H14 99.9995% filters with 99.9995% efficiency at 0.3 μm. The cabinet is made of a robust, epoxy-coated metal structure with SS304 internals. This cabinet provides Class II, Type A2 Airfow Pattern: 70% circulation, 30% exhaust, is operated using an elegant 10.1” intuitive touchscreen control system that provides all of the device’s status information and alerts for unsafe critical conditions and periodic maintenance reminders.

Catalog Number: (IKAAU078310)

Supplier: IKA

Supplier Article Number:: U078310

Description: The magic LAB® is a unique and multi-functional small-scale laboratory machine. It is designed for mixing, dispersing, wet milling and incorporation of powders into liquids. The magic LAB® is most frequently used for the development of new products or for optimising of existing process techniques, particularly in the chemical, cosmetic, pharmaceutical and food industries. It is an ideal machine for continuous, circulating and batch processing with interchangeable modules. Many work parameters of the magic LAB® are identical to those of the IKA 2000 inline production machines: UTL, DR, CMS, MHD, MK and MKO. Therefore, the magic LAB® ensures a reliable scale-up by offering the possibility to work with the same method from formulation development to mass production. The basic in-line machine is equipped with the single-stage dispersing module ULTRA-TURRAX® UTL. It is best suited for batch applications and can be adapted for the manufacturing of dispersions from coarse to fine. Compared to a conventional stirrer, the mixing time is reduced by up to 50%. Depending on the application, the basic unit can be modified quickly with different working modules.

UOM: 1 * 1 items

Sale

Supplier: MEMMERT

Description: These sterilisers comply with all relevant standards and regulations for medical products, and guarantee reliable program sequences, irrespective of the load and chamber volume. With the SetpointWAIT function validation of this hot air steriliser is possible anytime. The SetpointWAIT function ensures that the program only continues when the set point temperature has been reached. Precisely maintaining the sterilisation time and thus completely killing off even highly resistant microorganisms is, therefore, guaranteed at all times, irrespective of the sterilisation load and chamber volume. This feature can also be used with additional, freely positionable PT100 temperature sensors. In this case, sterilisation only begins when the set point temperature has been reached at all measurement points – that is, in the load. For special applications such as depyrogenisation, this hot air steriliser is absolutely ideal. SFplus models are equipped with TwinDISPLAY.

Supplier: GRANT INSTRUMENTS

Description: The Grant bio block heater/coolers are compact, flexible and easy to use – they are ideal for the rapid heating and cooling of microtubes, and a very effective tool for DNA sample preparation for denaturing and electrophoresis. There is a choice of three models: The PCH-1 has a capacity of up to 32 microtubes in a combination of two sizes (12×1,5 ml plus 20×0,5 ml), whereas the PCH-2 can accommodate up to 20 microtubes of one size (1,5 ml), and the PCH-3 can hold up to 20×2 ml microtubes.

Supplier: VWR Collection

Description: Polyester urethane foam. To hold small biopsies in place and prevent them from being lost. Enables fluids to circulate freely during processing.

Supplier: JULABO GmbH

Description: FT immersion coolers are primarily used for counter cooling when connected to a heating circulator, or for rapidly cooling fluids down to low temperatures. The compact, easy to use units are suitable for a variety of cooling applications.

Supplier: BOEKEL SCIENTIFIC

Description: Eliminate wrinkles and distortion during the preparation of paraffin embedded tissue sections. The bath surface is black ceramic coated steel for improved visibility of tissue sections. The bath has a separate on/off switch, pilot light, and thermostat. The wide, flat edge serves as a convenient drying surface for processed slides.

Supplier: JULABO GmbH

Description: Compact, ergonomically designed chillers which have integrated stainless steel tanks with large volumes. Models can be either air or water cooled. Applications include use with rotary evaporators, autoclaves, reaction vessels and for routine laboratory cooling. All units have an LED temperature display for actual/set point integrated into a splash-proof keypad and recessed grips for easy relocation integrated in the housing. A hinged tray serves as a compartment for the operating manual and other documents. The removable venting grid allows for easy cleaning of the condenser. Venting slots are located on the front and back, allowing units to be placed directly next to each other. Models FL2503 to FLW11006 have an early warning function with sensor monitoring to signal if the condenser is dirty, and online diagnostics with 'BlackBox' function.

Supplier: JULABO GmbH

Description: Environmentally friendly recirculating coolers that save tap water, units are rapid and powerful, and offer short cool-down times and high efficiency. Due to the compact design, the coolers fit either on or under laboratory benchtops. FC units feature two separate multi-displays (LED) for actual and set point values.

Supplier: LABCONCO

Description: Circulation tubing kit, hard ducted, stainless steel

Catalog Number: (JULA9620025)

Supplier: JULABO GmbH

Supplier Article Number:: 9620025

Description: Environmentally friendly recirculating coolers that saves tap water, these units were designed for simple cooling tasks where reliable continuous operation is important. Due to their compact design, the coolers can be positioned either on or under laboratory bench tops. Units can be used with water, water/glycol or Julabo Thermal G. They are ideal for cooling rotary evaporators, Kjeldahl instruments, measurement cells, automated analysis systems, CCD cameras, polarimeters, refractometers, calorimeters and Soxhlet apparatus.

UOM: 1 * 1 items

Sale

Supplier: MEMMERT

Description: This steriliser complies with all relevant standards and regulations for medical products and guarantees reliable programme sequences, irrespective of the load and chamber volume. Especially due to the SetpointWAIT function the validation of this hot air steriliser is possible anytime. The SetpointWAIT function ensures that the programme is only continued when the setpoint temperature has been reached. Precisely maintaining the sterilisation time and thus completely killing off even highly resistant microorganisms is therefore guaranteed at all times, irrespective of the sterilisation load and chamber volume. This feature can also be used with additional, freely positionable Pt100 temperature sensors. In this case, sterilisation only begins when the setpoint temperature has been reached at all measurement points – that is, in the load. For the special application of depyrogenisation, the hot-air steriliser is absolutely ideal. The SF models are equipped with single display.