You Searched For: PE\\\\\\\\\\\\\\\/LDPE\\\\\\\\\\\\\\\/HDPE+Stoppers


3,701  results were found

SearchResultCount:"3701"

Sort Results

List View Easy View (new)

Rate These Search Results

Catalog Number: (VWRI462-0585)
Supplier: VWR Collection
Description: Drain stoppers, VWR®
UOM: 1 * 5 items


Supplier: VWR Collection
Description: Stopper for test tubes Ø 12 to 16 mm, polyethylene, with tongues.

Supplier: KIMBLEKONTES
Description: HDPE, linear, ideal for flasks that are grounded to [ST] stopper dimensions.

Supplier: Simport Scientific
Description: Ideal closures for glass and plastic reagent, sample and culture tubes, LDPE.

Supplier: VWR Collection
Description: Greaseless closure, which prevents ground joints from seizing. With inclined, circumferential sealing lips for better sealing and reduced risk of breakage. Easily detachable. With ergonomically shaped grip.

Supplier: Simport Scientific
Description: HDPE. Fit tubes of 15 ml capacity and 17 mm Ø.

Catalog Number: (GRANUWB-DS)
Supplier: GRANT INSTRUMENTS LTD.
Supplier Article Number:: UWB-DS
Description: Drain stoppers, recommended when using heat transfer beads, to prevent beads entering the drain hole.
UOM: 1 * 5 items


Supplier: VWR Collection
Description: These stoppers have a fluorocarbon film on the top and bottom. In addition, the enhanced lyophilisation stoppers are coated with a cross-linkable polydimethylsiloxane on the underside of the flange.

Supplier: Lenz Laborglas GmbH & CO.KG
Description: <B>PE</B>, white with red cover plate and octagonal head.

Supplier: Simport Scientific
Description: PE Plug type push-in caps and 2-position snap caps are made of polyethylene for test tubes with outside diameters of 12 or 17 mm. Dual position caps offer two possibilities: the closed but unsealed position where samples are maintained aerobic for microbiological procedures; and the fully sealed position where the cap is pushed tight to seal the tube for anaerobic use or for storage, transfer and centrifuge applications.

Supplier: BÜRKLE
Description: Stopper made of PE, hollow with sealing rings and octagonal top.

Supplier: Bohlender
Description: For closing ground joint parts. With ground joint and sealing rings on the outside; knurled or hexagonal grip. Compared with glass stoppers, they are easily removable and can be used without grease.

Supplier: Corning
Description: These PYREX® No.13 stoppers are made from linear HDPE and have closed bottoms to conform to Standard Taper stopper dimensions.
Supplier: Simport Scientific
Description: Designed for easy-on, easy-off use. Cap removal is simple and quick. FitsAll™ closure is ideal for recapping most 12 and 16 mm O.D. evacuated glass blood collection tubes. Flexible FitsAll™ closures protect from aerosols of highly infectious microorganisms. They guard samples against cross-contamination and laboratory work areas against infection and spillage. Precision molded from low-density polyethylene, FitsAll™ fits firmly on the tube. Not suitable for autoclaving.

Supplier: Corning
Description: PTFE. Ideal for flasks that are grounded to [ST] stopper dimensions.

Supplier: Corning
Description: Coloured stoppers from LDPE.

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR at sales@sg.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +65 6505 0760.
1 - 16 of 3,701
no targeter for Bottom