You Searched For: Sodium+azide

Catalog Number: (VWRC0639-250G)

Supplier: VWR Chemicals

Description: Sodium azide, high purity

UOM: 1 * 250 g

MSDS Certificates Sale

Supplier: VWR Chemicals

Description: Sodium azide ≥99.0%, AnalaR NORMAPUR® analytical reagent

MSDS Certificates

Supplier: MACRON AVANTOR BRAND

Description: Macron Fine Chemicals™ OR: organic reagents that are suitable for research applications.

MSDS Certificates

Supplier: Thermo Scientific

Description: Sodium azide ≥99%

MSDS Certificates

Supplier: Thermo Scientific

Description: Sodium azide 99+%

Certificates

Catalog Number: (VWRCK720-50ML)

Supplier: VWR Chemicals

Description: Concentrated 20% BSA solution (Albumin, Bovine, Fraction V – Cold Alcohol Isolation) in 0,85% sodium chloride and contains 0,1% sodium azide (as a preservative for stability).

UOM: 1 * 50 mL

MSDS Certificates Sale

Supplier: Avantor

Description: Packing materials for low pressure preparative and flash chromatography. Chemically stable from pH 2 to 8,5. They are not damaged by the use of cleaning and antimicrobial agents such as sodium azide, dilute aqueous solutions of trifluoroacetic acid and acetic acid, organic solvents such as methanol and acetonitrile, and concentrated aqueous solutions of salts and urea. The packings feature irregular-shaped particles.

MSDS

Supplier: PanReac AppliChem

Description: Sodium azide

Catalog Number: (ICNA08651111)

Supplier: MP Biomedicals

Supplier Article Number:: 08651111

Description: The antiserum is in 0,02 M sodium phosphate, 0,14 M sodium chloride, pH 7,3, 0,05% sodium azide, adjusted to standard titer, filtered through a 0,22 μm filter, vialed and lyophilised.

UOM: 1 * 2 mL

Sale

Catalog Number: (ICNA08322601)

Supplier: MP Biomedicals

Supplier Article Number:: 08322601

Description: PSA supplied as solution in 0,05 M sodium phosphate buffer, pH 7,5, containing 0,15 M NaCl and 0,09% sodium azide. Sterile filtered using a 0,2 µm filter.

UOM: 1 * 100 µG

Sale

Catalog Number: (ICNA0855136)

Supplier: MP Biomedicals

Supplier Article Number:: 0855136

Description: The antiserum is prepared by hyperimmunizing goats with human serum. The resulting antiserum is delipidated and dialyzed into 0.02M sodium phosphate, 0.14M sodium chloride, pH 7.3, with 0.05% sodium azide, adjusted to standard titer, filtered through a 0.22 µm filter, vialed and lyophilized.

The total protein is measured using the Biuret procedure, with bovine albumin as a standard. Antibody titer is standardized with an in-house control by immunoelectrophoresis. Each antiserum is tested for specificity at a minimum of 80 mg/ml using immunoelectrophoresis. It shows reactivity to human serum; cross-reactivity to other species may exist.

Reconstitute product with 2.0 ml of deionized or distilled water. Gentle swirling may be used to speed rehydration. Avoid vigorous shaking of the reconstituted material.

Store lyophilized product at 2-8°C. Store reconstituted material no longer than 4 weeks at 2-8°C. For long-term storage, aliquot
and freeze reconstituted product at -20°C or lower.

Warning and Caution: This product contains sodium azide. To prevent formation of toxic vapors, do not mix with strongly acidic solutions. To prevent formation of potentially explosive metallic azides in metal plumbing, always wash into drain with copious quantities of water.

UOM: 1 * 2 mL

Sale

Catalog Number: (ICNA0855110)

Supplier: MP Biomedicals

Supplier Article Number:: 0855110

Description: Product is a lyophilized powder rabbit antiserum to human albumin and buffer salts. The total protein is measured using the Biuret procedure, with bovine albumin as a standard. Antibody titer is standardized by equivalence -point precipitation. Each antiserum is tested for specificity at a minimum of 80 mg/mL using immunoelectrophoresis.

The antiserum is prepared by hyperimmunizing rabbits with highly purified human albumin; antiserum is delipidated and made specific by solid-phase absorption. The resulting antiserum is dialyzed into 0.02M sodium phosphate, 0.14M sodium chloride, pH 7.3, with 0.05% sodium azide, adjusted to standard titer, filtered through a 0.22 µm filter, vialed and lyophilized.

UOM: 1 * 2 mL

Sale

Catalog Number: (ICNA0855800)

Supplier: MP Biomedicals

Supplier Article Number:: 0855800

Description: Product is the lyophilized powder of rabbit antiserum to sheep red blood cells and buffer salts.

The total protein is measured using the Biuret procedure, with bovine albumin as a standard. Hemagglutination titer is standardized with an in-house control by measurement of agglutination end-point with 10% sheep red blood cells.

Warning and caution: This product contains sodium azide. To prevent formation of toxic vapors, do not mix with strongly acidic solutions. To prevent formation of potentially explosive metallic azides in metal plumbing, always wash into drain with copious quantities of water.

UOM: 1 * 2 mL

Sale

Catalog Number: (ICNA0855317)

Supplier: MP Biomedicals

Supplier Article Number:: 0855317

Description: Product is the lyophilized powder of goat antiserum to dog serum and buffer salts

The total protein is measured using the Biuret procedure, with bovine albumin as a standard. Antibody titer is standardized with an in-house control by immunoelectrophoresis. Each antiserum is tested for specificity at a minimum of 80 mg/ml using immunoelectrophoresis. It shows reactivity to dog serum; cross-reactivity to other species may exist.

Applications: Immunostaining of cell suspensions, acetone-fixed frozen tissue sections, and formalin-fixed, paraffin-embedded tissue sections.

Warning and Caution:This product contains sodium azide. To prevent formation of toxic vapors, do not mix with strongly acidic solutions. To prevent formation of potentially explosive metallic azides in metal plumbing, always wash into drain with copious quantities of water

UOM: 1 * 2 mL

Sale

Catalog Number: (ICNA0855028)

Supplier: MP Biomedicals

Supplier Article Number:: 0855028

Description: The IgG fraction is prepared from the specific goat antiserum by delipidation, ammonium sulfate fractionation and anion exchange chromatography. The resulting IgG fraction is dialyzed into 0.02M sodium phosphate, 0.14M sodium chloride, pH 7.3, with 0.05% sodium azide, adjusted to standard titer, filtered through a 0.22 µm filter, vialed and lyophilized

The total protein is measured using the Biuret procedure, with bovine albumin as a standard. Antibody titer is standardized to an in-house standard by equivalence-point precipitation. Each IgG fraction is tested for purity and specificity at a minimum of 40 mg/mL using immunoelectrophoresis. The product is mostly goat IgG; no trace of albumin is detected.

UOM: 1 * 5 mL

Sale

Catalog Number: (ICNA0855526)

Supplier: MP Biomedicals

Supplier Article Number:: 0855526

Description: This product is fluorescein-5-isothiocyanate (FITC "Isomer I")-conjugated goat affinity purified F(ab')2 fragments to mouse immunoglobulins (IgG,IgA,IgM) and buffer salts.The total protein is measured by absorbance (A)280 nm); F/P ratio is calculated using absorbance at 491.5nm. Antibody titer of the affinity purified F(ab')2fragments is standardized with an in-house control by immunoelectrophoresis. The affinity purified F(ab')2 fragment is tested for purity at 10 mg/mL using immunoelectrophoresis. The product is goat F(ab')2; no trace of albumin, whole molecule IgG or Fc is detected. This product contains sodium azide. To prevent formation of toxic vapors, do not mix with strongly acidic solutions. To prevent formation of potentially explosive metallic azides in metal plumbing, always wash into drain with copious quantities of water.

UOM: 1 * 2 mg

Sale