You Searched For: Bohlender


804  results were found

SearchResultCount:"804"

Sort Results

List View Easy View (new)

Rate These Search Results

Supplier: Bohlender
Description: <B>PTFE</B> stirrers: These stirrer tools have a PTFE coated stainless steel shaft, and the U-shaped stirrer blade is made entirely of PTFE. Ideal for mixing viscous liquids. Strong, tangential flow with shear rate in the margin area, little sediment on the wall of the vessel.

Supplier: Bohlender
Description: Stirrer shafts made of PTFE-jacketed stainless steel with the blade made completely of PTFE.

Supplier: Bohlender
Description: Tube fitting made of PTFE with nuts made of glass-fibre reinforced PTFE.

Supplier: Bohlender
Description: GL 14 and GL 18 hose connectors made of PFA, GL 25 and GL 32 hose connectors made of PTFE with elastic sealing lip and FPM O-ring.

Supplier: Bohlender
Description: Made of glass-fibre reinforced PTFE.

Supplier: Bohlender
Description: These bearings have sealing rings to ensure a perfect seal. A special gasket made of PTFE and a FPM o-ring which is compressed by a GL screw cap ensure the stirrer shaft is sealed.

Supplier: Bohlender
Description: PTFE.

Supplier: Bohlender
Description: Stirring Tools, BOLA, Replacement gasket, PTFE with FPM O-ring for shaft guides

Supplier: Bohlender
Description: Centrifugal stirrer blades made of PTFE consisting of 2 paddles, bolt and clamp ring.

Supplier: Bohlender
Description: Tube end fittings with male thread and PA washers.

Supplier: Bohlender
Description: Connector, GL screw thread reduction, with black screw cap made of PPS with PTFE/FPM sealing, with movable reduction body made of PTFE for transition to GL threads.

Supplier: Bohlender
Description: Stirrer shafts made of PTFE-jacketed stainless steel and the paddles made of PTFE.

Supplier: Bohlender
Description: Made of PFA, transparent with screw-cap.

Supplier: Bohlender
Description: Stirrer shafts made of PTFE-jacketed stainless steel and the impeller completely made of PTFE with three blades bent backwards.

Supplier: Bohlender
Description: Dropping funnel with fine adjustment stopcock having cone size 29 made of PTFE.

Supplier: Bohlender
Description: Conductive corrugated tubing with nominal width and circular corrugations around the longitudinal axis.

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR at sales@sg.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +65 6505 0760.
1 - 16 of 804
no targeter for Bottom