You Searched For: UPCHURCH SCIENTIFIC


317  results were found

SearchResultCount:"317"

Sort Results

List View Easy View (new)

Rate These Search Results

Supplier: UPCHURCH SCIENTIFIC
Description: FEP, natural or coloured.

Supplier: UPCHURCH SCIENTIFIC
Description: PEEK or stainless steel.

Supplier: UPCHURCH SCIENTIFIC
Description: Upchurch Scientific®, XLT-111, flangeless fitting for 1/16" OD tubing, PEEK natural/ETFE natural, 10-32 flat-bottom port, standard knurl, 2500 psi

Supplier: UPCHURCH SCIENTIFIC
Description: Polymer tubing, coloured.

Supplier: UPCHURCH SCIENTIFIC
Description: PEEK polymer adapters connect peristaltic tubing to standard rigid or semi-rigid tubing.

Catalog Number: (UPCHFS-315-02)
Supplier: UPCHURCH SCIENTIFIC
Supplier Article Number:: FS-315-02
Description: Upchurch Scientific®, Maintenance kit to replace a worn or damaged cutting wheel
UOM: 1 * 1 items


Supplier: UPCHURCH SCIENTIFIC
Description: Metric flangeless fittings offer the same benefits as flangeless fittings with the additional feature of being used for metric tubing and ports. They are specifically designed to connect 1,8, 2,0, 2,5, 3,0, or 4,0 mm Ext.Ø tubing to flat-bottom ports when paired with the appropriate M6, 1/4-28, or 5/16-24 flangeless nuts.

Supplier: UPCHURCH SCIENTIFIC
Description: These adapters are made from PEEK or PTFE. Female to male 10-32 to 1/4-28 adapters.

Supplier: UPCHURCH SCIENTIFIC
Description: These standard size wrenches can be used to tighten most nuts into unions.

Supplier: UPCHURCH SCIENTIFIC
Description: Upchurch Scientific® quick connect Luer adapters provide the opportunity to adapt either a female Luer or male Luer connection to a threaded connection. Conform to ISO requirements for medical Luer taper configuration and performance (45 psi/3,1 bar).

Supplier: UPCHURCH SCIENTIFIC
Description: PP, ETFE or PEEK. The barbed inserts of the swivel barb adapters spin freely from the threaded nut in order to prevent the tubing from twisting during installation.

Supplier: UPCHURCH SCIENTIFIC
Description: Ultra high performance fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures.

Supplier: UPCHURCH SCIENTIFIC
Description: These low pressure unions are made from PEEK, ETFE, Delrin or PP.

Supplier: UPCHURCH SCIENTIFIC
Description: Reusable fittings made from stainless steel and proprietary PEEK polymer blend. Reusable up to 10 cycles without tubing damage or impact on pressure holding ability or carry-over (5 cycles if tightened to 1,6 N.m). Pressure rating up to 30 000 psi (2070 bar). Required torque 10 in-lbs (1,10 N-m)/14 in-lbs (1,6 N-m).

Supplier: UPCHURCH SCIENTIFIC
Description: PEEK or PCTFE.

Supplier: UPCHURCH SCIENTIFIC
Description: These female M6 adapters are made from PEEK, EFTE or PCTFE.

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR at sales@sg.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +65 6505 0760.
1 - 16 of 317
no targeter for Bottom