Print…

You Searched For: Vacuum Traps

Placing vacuum traps between an apparatus and vacuum source establishes a safe and controlled working system. The glassware protects the pump from the separated solvents while simultaneously preventing vapours from being emitted back into the system. Vacuum traps in reservoir, one piece, or two piece styles also guarantee that personnel will not be exposed to gases produced that could be harmful. Standard sized inlet and outlet stems can snugly fit regular stoppers.

Placing vacuum traps between an apparatus and vacuum source establishes a safe and controlled working system. The glassware protects the pump from the separated solvents while simultaneously preventing vapours from being emitted back into the system. Vacuum traps in reservoir, one piece, or two piece styles also guarantee that personnel will not be exposed to gases produced that could be harmful. Standard sized inlet and outlet stems can snugly fit regular stoppers.


6  results were found

Refine Results Sort by
SearchResultCount:"6"

Sort Results

List View Easy View (new)

Rate These Search Results

Product Image-BAKR7208-00

J.T.Baker®, SPE Glass Column Processors

Supplier: Avantor
Description: These glass column processors are specially designed glass vacuum chambers that allow multiple samples to be run simultaneously. The glass chamber allows unobstructed viewing of samples at all times.

Product Image-LENZ05355570

Cold traps with/without condensation drain

Supplier: Lenz Laborglas GmbH & CO.KG
Description: For direct filling with coolant. Double-walled design ensures low coolant consumption. Includes NS 29/32 standard ground socket for connecting to the apparatus and NS 29/32 standard ground cone for connecting to the vacuum pump. DURAN®, borosilicate glass, clear.

Product Image-BOHLB317-60

Cold traps, BOLA

Catalog Number: (BOHLB317-60)
Supplier: Bohlender
Supplier Article Number:: B317-60
Description: PTFE head with two threaded necks GL14 for connection of hard-walled tubing by means of separately available laboratory screw joints. Connecting nut is made of PTFE reinforced with glassfibres. GL hose connectors are recommend for soft, flexible tubing. Temperature resistant from −200 to +250 °C with suitable vaccum transparent. PFA, transparent.
UOM: 1 * 1 items
Product Image-CORN7729-32

Cold traps, PYREX®

Supplier: Corning
Description: These cold traps are made of PYREX® borosilicate glass, clear [ST] joints on both outer and inner joints. The top and side tubulations are the same Ext.Ø. as the centre tube and have a length of 75 mm.

Certificates

Product Image-CORN4000-10024

Rotary evaporator traps, PYREX®

Supplier: Corning
Description: These PYREX® traps are used in rotary evaporators. They have a round body with upper and lower stems.

Certificates

Product Image-CGLACG-4515-20

Vacuum trap, serrated connections

Catalog Number: (CGLACG-4515-20)
Supplier: CHEMGLASS INC
Supplier Article Number:: CG-4515-20
Description: Two-piece construction for easy removal of condensate. Inlet and outlet are 180° apart for installation into a variety of vacuum systems.
UOM: 1 * 1 items
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR at sales@sg.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +65 6505 0760.
1 - 6 of 6
no targeter for Bottom