You Searched For: Freeze+Dryers

Catalog Number: (LBCP7522700)

Supplier: LABCONCO

Supplier Article Number:: 7522700

Description: Benchtop freeze drying system, type 304 stainless steel with 12 ports, -75 °C. Ideal for the laboratory with occasional lyophilisation requirements, the Dry Ice Benchtop Freeze Dry System provides a simple, economical means of freeze-drying. It is equipped with a center well for dry ice and solvent that serves as a water vapour collector and doubles as a convenient pre-freezing bath. Flasks, serum bottles and ampules may be frozen by dipping and rotating them in the well. Chamber size 248 x222 mm

UOM: 1 * 1 items

Sale

Supplier: LABCONCO

Description: Racks and supports hold test tubes, flasks and microwell plates for pre-freezing and freeze drying samples; clear canister holds chemical traps.

Supplier: LABCONCO

Description: Accessory for Freeze Dryer, 14-Port manifold, 304 stainless steel with fourteen neoprene valves and latching pin, accomodates both 1/2” and 3/4” adapters, 617×269×262 mm

Supplier: LABCONCO

Description: Accessory for freeze dryer, Drying chamber, stainless steel 584×343 mm, for Freezone® 6, 12, 18

Supplier: LABCONCO

Description: The FreeZone® bulk and stoppering tray dryers have a stainless steel interior and epoxy coated, stainless steel exterior. Units include three probes for monitoring sample and shelf temperature. Microprocessor controlled temperature programming from −40 to +40 °C during ramping and holding in stoppering tray dryers, whereas in bulk dryers a microprocessor maintains the system temperature within 3 °C of the set point (maximum 60 °C). Units have an LCD display and audible/visual alarm indication for temperature and vacuum changes.

Supplier: LABCONCO

Description: End-Zone™ provides an alternative to visual inspection making it easy to determine when freeze drying is complete.

Supplier: LABCONCO

Description: Accessory for Freeze Dryer, Glass lid, for 12-port drying chamber, Ø 235 mm

Supplier: LABCONCO

Description: Accessory for Freeze Dryer, Temperature probe, 711 mm, for small tray dryers, bulk tray dryers or stoppering tray dryers

Catalog Number: (LBCP780701050)

Supplier: LABCONCO

Supplier Article Number:: 780701050

Description: These FreeZone® small tray dryers provide precise control and program flexibility for consistent performance and are designed for lyophilising small to moderate bulk sample loads or numerous sample batches.

UOM: 1 * 1 items

Sale

Supplier: LABCONCO

Description: FreeZone® bench top freeze dryers are designed for lyophilising light to moderate sample loads. The compact design is ideal for laboratories with limited floor space.

Supplier: LABCONCO

Description: FreeZone® console freeze dryers with or without stoppering tray dryers are designed for lyophilising moderate to large loads and stoppering vials or serum bottles under vacuum. The console features a front viewing window and interior space for a vacuum and accommodation for a full size tray dryer such as the FreeZone® stoppering tray dryer pump (sold separately).

Catalog Number: (LBCP7201800)

Supplier: LABCONCO

Supplier Article Number:: 7201800

Description: 8-port manifold, W×D×H: 218×218×399 mm

UOM: 1 * 1 items

Sale

Supplier: LABCONCO

Description: Fast-Freeze® flasks for FreeZone® freeze dry systems are designed to be easier to handle, faster to load, and more convenient to use in the laboratory for freeze drying.

Supplier: LABCONCO

Description: The FreeZone® Triad™ freeze drying system is an all inclusive bench top lyophiliser for 4 samples on the left side and stoppering tray dryer processing shelf. The processing shelf holds up to 441×3 ml serum bottles and the four valves hold samples in flasks, serum bottles or ampoules. Samples for both types of freeze drying can be run at once. The chamber pre-freezes samples to save money and time, eliminating the need for a separate freezer and product transfer.

Supplier: LABCONCO

Description: Heated product shelves with clear chamber for drying bulk samples, or drying serum bottles, vials or microplates. Chamber connects to a FreeZone® freeze dryers for control and recording of the shelf temperature from the Lyo-Works display.

Supplier: LABCONCO

Description: Designed to handle the lyophilisation needs of research laboratories. Collectors that reach −50 °C are available with capacities from 1 to 18 litres. Cascade systems in 2,5, 4,5, 6 and 12 litre collector capacities that reach −84 °C are ideal for freeze drying samples with low eutectic temperatures. The FreeZone® −105 °C bench top freeze dryer systems are suitable for samples with very low eutectic points including ones containing small amounts of methanol or ethanol.