You Searched For: LABCONCO

Supplier: LABCONCO

Description: These cabinets support fume hoods and safely store and vent solvents and other flammable liquids. The contents inside them are also protected during any fire case.

Supplier: LABCONCO

Description: Storage cabinet accessory, Interior shelf kit with PVC tray for 1219 mm protector acid storage cabinets

Supplier: LABCONCO

Description: Pump inlet filter

Catalog Number: (LBCP110410021)

Supplier: LABCONCO

Supplier Article Number:: 110410021

Description: The Protector® XStream® benchtop laboratory hoods are chemical resistant, fiberglass reinforced, composite liner and baffle. These are designed for general chemical applications.

UOM: 1 * 1 items

Sale

Supplier: LABCONCO

Description: All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Catalog Number: (LBCP3980422)

Supplier: LABCONCO

Supplier Article Number:: 3980422

Description: Purifier HEPA filtered enclosures protect the user from agents that require biosafety level 1, 2 or 3 containment but no product protection. With ergonomic air foil with aerodynamic clean-sweep airflow openings; upper dilution air supply; zone-perforated rear baffle; side-entry air foils; and upper containment sash foil.

UOM: 1 * 1 items

Sale

Catalog Number: (LBCP3030000)

Supplier: LABCONCO

Supplier Article Number:: 3030000

Description: Compact, benchtop Fiberglass 30 laboratory hoods are designed for research, educational and clinical applications requiring small working space and efficient fume removal. The fiberglass liner is corrosion-resistant, durable, fire-resistant and light reflective. The smooth one-piece molded construction offers fewer crevices for easy cleaning.

UOM: 1 * 1 items

Sale

Supplier: LABCONCO

Description: Hard duct exhaust connector, Ø 15,2 cm, for connecting the glove box to ductwork attached to a remote blower (Requires ductwork and remote blower)

Supplier: LABCONCO

Description: This mobile system with or without heat boost combines the separate vacuum concentrator and cold trap components into one space-saving console and include casters for portability from laboratory to laboratory. A 12 to 13 mm rotor and solvent trap are also included. The interior can accommodate a vacuum pump — the only additional component necessary to begin processing.

Catalog Number: (LBCP3820020)

Supplier: LABCONCO

Supplier Article Number:: 3820020

Description: These PuriCare Open Access Transfer Station offer utmost efficiency for cage changing operations. Open access on two sides provides ample workspace for one or two operators to transfer animals from dirty cages to clean ones. This enclosure provides personnel, animal and environmental protection. HEPA-filtered vertical airflow provides Class 100 clean air in the work area to protect the animals from cross-contamination. At the same time, room air is drawn into grilles located on the work surface directly below the sash openings to ensure containment and protect the operator from allergens. All contaminated air inside the enclosure is filtered so that particulate-free air is exhausted back into the room, protecting the environment.

UOM: 1 * 1 items

Sale

Catalog Number: (LBCP4861800)

Supplier: LABCONCO

Supplier Article Number:: 4861800

Description: Flexible duct connections reduce vibration between the blower and PVC ductwork.

UOM: 1 * 1 items

Sale

Supplier: LABCONCO

Description: These glove boxes with stainless steel liner provide inlet and outlet ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment. Available with two or four glove ports (double version).

Catalog Number: (LBCP3505300)

Supplier: LABCONCO

Supplier Article Number:: 3505300

Description: Beakers specifically designed for the Goldfisch Fat Extractor. Thick-walled borosilicate glass with flanged and ground tops to facilitate connection to the condenser.

UOM: 1 * 6 items

Sale

Supplier: LABCONCO

Description: Accessory for Freeze Dryer, FreeZone®

Catalog Number: (LBCP780701050)

Supplier: LABCONCO

Supplier Article Number:: 780701050

Description: These FreeZone® small tray dryers provide precise control and program flexibility for consistent performance and are designed for lyophilising small to moderate bulk sample loads or numerous sample batches.

UOM: 1 * 1 items

Sale

Supplier: LABCONCO

Description: FlaskScrubber glassware washers are designed to wash and dry narrow-neck and general purpose labware. They have a lower spindle rack that holds up to 36 pieces of primarily narrow-neck glassware such as volumetric flasks. Water and detergent are pumped through the spindles to reach the innermost areas of your glassware. Forced air drying through the spindles ensures thorough drying inside and out. Specialized inserts for pipets, BOD bottles, petri dishes, culture tubes and small utensils enhance the FlaskScrubber's versatility. The washer may be outfitted with an upper standard or spindle rack to increase capacity. FlaskScrubber is a viable option for cleaning and reuse of glassware used for trace metal, volatile organic and semi-volatile organic compounds.