464  results were found

SearchResultCount:"464"

Sort Results

List View Easy View (new)

Rate These Search Results

Catalog Number: (LBCP8045000)
Supplier: LABCONCO
Supplier Article Number:: 8045000
Description: Glassware carts, used to carry glasswares, plasticwares and small instruments in vinyl-coated wire baskets. Choose from 2-baskets or 4-basket styles complete with removable plastic drip pan to catch spills.
UOM: 1 * 1 items


Catalog Number: (LBCP9007201)
Supplier: LABCONCO
Supplier Article Number:: 9007201
Description: Filter cartridge, Activated carbon cartridge, 1,8 kg
UOM: 1 * 1 items


Catalog Number: (LBCP3970325)
Supplier: LABCONCO
Supplier Article Number:: 3970325
Description: Filtered PCR Enclosures direct HEPA-filtered air downward over the work area to provide ISO Class 5 conditions and protect your work from particulate contamination. These specialized vertical clean benches provide a controlled environment in which to perform polymerase chain reaction experiments. These enclosures include a variable digital timer and when the set time expires, the UV light automatically switches off in preparation for the next experiment.
UOM: 1 * 1 items


Catalog Number: (LBCP3961622)
Supplier: LABCONCO
Supplier Article Number:: 3961622
Description: XPert™ Bulk Powder Filtered System is designed to provide user protection from hazardous airborne particulates and fumes generated during powder transfer operations. Patented features include an ergonomic air foil with Clean-Sweep openings to enhance airflow and a zone-perforated rear baffle that creates horizontal laminar airflow to maximize containment. The system includes a built-in blower, 99,99% efficient HEPA filter, true bag-in/bag-out filter disposal system, and pre-wired fluorescent light and switches for blower and light.
UOM: 1 * 1 items


Catalog Number: (LBCP9113200)
Supplier: LABCONCO
Supplier Article Number:: 9113200
Description: Support stand for WaterPro Purification Systems on horizontal surfaces
UOM: 1 * 1 items


Supplier: LABCONCO
Description: Glassware washing machines, Cylinder insert graduated

Supplier: LABCONCO
Description: SpillStopper work surface, left side cupsink cutout, 1219×762×32 mm, 50 kg, For: Laboratory Hoods, Protector®

Supplier: LABCONCO
Description: These cabinets support fume hoods and safely store and vent solvents and other flammable liquids. The contents inside them are also protected during any fire case.

Supplier: LABCONCO
Description: Storage cabinet accessory, Protector®, Vent kit

Supplier: LABCONCO
Description: Pump inlet filter

Supplier: LABCONCO
Description: These portable systems provide user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and HEPA filter are mounted in the upper plenum to save space, and the enclosures have low installation costs and require no outside ducting. Systems also provide quiet operation as low as 45 dBA, depending on face velocity.

Catalog Number: (LBCP110410021)
Supplier: LABCONCO
Supplier Article Number:: 110410021
Description: The Protector® XStream® benchtop laboratory hoods are chemical resistant, fiberglass reinforced, composite liner and baffle. These are designed for general chemical applications.
UOM: 1 * 1 items

Environmentally Preferable


Supplier: LABCONCO
Description: Accessory for Freeze Dryer, Temperature probe, 266 mm, for heated product shelf chambers

Environmentally Preferable

Supplier: LABCONCO
Description: Storage cabinets support fume hoods and used for storage and venting of small laboratory instruments, mild acids and other reagents.

Supplier: LABCONCO
Description: This mobile system with or without heat boost combines the separate vacuum concentrator and cold trap components into one space-saving console and include casters for portability from laboratory to laboratory. A 12 to 13 mm rotor and solvent trap are also included. The interior can accommodate a vacuum pump — the only additional component necessary to begin processing.

Supplier: LABCONCO
Description: Mechanical or electrical pass-through kit, provides three pass-through ports with sealing ID ranges 0,230/0,395, 0,230/0,530 and 0,450/0,705, useful for sealing cords and plumbing (Requires installation and drill holes; installation kit 5240800 is recommended)

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR at sales@sg.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +65 6505 0760.
17 - 32 of 464
no targeter for Bottom