Print…

You Searched For: Supports

Supports are designed to hold specific-sized samples and equipment for safe reaction testing procedures. With strong construction, the devices act as protective barriers to keep the benchtop surface and handlers safe from intensely heated samples or harsh solvents. Stands will also precisely position the supplies for specific requirements and allow researchers both hands for maximum working efficiency. The supports give employed instruments the stabilization needed for a controlled and accurate analysis.

Supports are designed to hold specific-sized samples and equipment for safe reaction testing procedures. With strong construction, the devices act as protective barriers to keep the benchtop surface and handlers safe from intensely heated samples or harsh solvents. Stands will also precisely position the supplies for specific requirements and allow researchers both hands for maximum working efficiency. The supports give employed instruments the stabilization needed for a controlled and accurate analysis.


17  results were found

Refine Results Sort by
SearchResultCount:"17"

Sort Results

List View Easy View (new)

Rate These Search Results

Product Image-VWRU56250-024

VWR®, Cork Rings for Round Bottom Flasks

Supplier: VWR Collection
Description: The ideal rest for round bottom flasks and other round bottom glass vessels. Compressed cork, natural.

Product Image-VWRI217-1002

VWR®, Cork Rings for Round Bottom Flasks

Supplier: VWR Collection
Description: The ideal rest for round bottom flasks and other round bottom glass vessels. Compressed cork, natural.

Product Image-VWRI217-1009

VWR®, Cork Plates

Supplier: VWR Collection
Description: Made of natural cork.

Product Image-CORN430236

Support cushions for centrifuge bottles, Corning®

Supplier: Corning
Description: PP tubes, polyetherimide support cushions.

Certificates

Product Image-SCOT292013109

Sleeves for filter crucibles, DURAN®

Supplier: DWK Life Sciences
Description: These sleeves are made from EPDM (ethyene/propylene-diene-rubber).

Product Image-VERN161040

Holders for round bottom flask, silicone, blue

Supplier: Saint Gobain Life Sciences
Description: Can be used to provide a stable support for round-bottomed flasks and other containers with curved bases. Reversible. Non-slip, soft, stackable and easy to clean. Silicone, blue.

Product Image-SCOT292023907

Rubber conical gaskets Guko, DURAN®

Supplier: DWK Life Sciences
Description: EPDM rubber.

Product Image-IKAA4448400

Carrier for round bottom flasks, IKA®

Catalog Number: (IKAA4448400)
Supplier: IKA
Supplier Article Number:: 4448400
Description: This flask carrier with handle is constructed from anodised aluminium.
UOM: 1 * 1 items
Product Image-KART271

Holders for round bottom flasks

Catalog Number: (KART271)
Supplier: KARTELL
Supplier Article Number:: 271
Description: Provide secure, non-slip support for round bottom flasks and any other flasks with convex bases of any height. The concentric inner rings can hold flask sizes from 10 ml to 10 L. PP, white.
UOM: 1 * 1 items
Product Image-DENE2010062

Conical sleeves for vacuum filtration

Supplier: DEUTSCH & NEUMANN
Description: Rubber, autoclavable.

Product Image-KART420

Sleeves for vacuum filtration

Catalog Number: (KART420)
Supplier: KARTELL
Supplier Article Number:: 420
Description: Set of 7 adapters, conical, made of black neoprene, sleeve supports for Büchner funnels and filter flasks.
UOM: 1 * 1 items
Product Image-SLINCON0006

Conical sleeves for vacuum filtration, Sterilin®

Catalog Number: (SLINCON0006)
Supplier: Sterilin
Supplier Article Number:: CON0006
Description: Red natural rubber cones for use with filtering flasks.
UOM: 1 * 1 SET
Product Image-USBE5674

Cork Rings for Round Bottom Flasks

Catalog Number: (USBE5674)
Supplier: USBECK Laborgeräte
Supplier Article Number:: 5674
Description: Flask holder, Cork, For: 2000 ml, Ø ext.: 170 mm, Int.Ø bottom: 120 mm, Height: 30 mm
UOM: 1 * 1 items
Product Image-BELAF389500000

Supports for round bottom flasks, SP Bel-Art

Catalog Number: (BELAF389500000)
Supplier: Bel-Art Products, a Part of SP
Supplier Article Number:: F389500000
Description: This PP round bottom flask support fits any size round-bottom flask up to 10 liters using stepped, concentric rings.
UOM: 1 * 1 items
Product Image-BELAF183090250

Beaker and flask holders, SP Bel-Art

Catalog Number: (BELAF183090250)
Supplier: Bel-Art Products, a Part of SP
Supplier Article Number:: F183090250
Description: Lead ring, with red vinyl coating and four stainless steel brackets. Holds beakers and flasks firmly in a fixed position. Ideal for use in water baths as it allows liquid to circulate beneath the vessel base.
UOM: 1 * 1 items
Product Image-BRND462026

Sleeves for filter crucibles

Supplier: Brand
Description: Sleeves made of rubber (EPDM) suitable for filter crucibles.

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR at sales@sg.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +65 6505 0760.
1 - 16 of 17
no targeter for Bottom