You Searched For: Valves

A variety of valves that can, depending on the product, be used to regulate pressure levels of liquid and gas in flow systems. These valves can be used for making connections between different lengths of tubing and connection points. Liquid and vacuum seals. A plethora of scenarios exist in which these valves can be used, each with a unique purpose and design for maximum safety and efficiency when in use, especially when pressure is of great concern.

A variety of valves that can, depending on the product, be used to regulate pressure levels of liquid and gas in flow systems. These valves can be used for making connections between different lengths of tubing and connection points. Liquid and vacuum seals. A plethora of scenarios exist in which these valves can be used, each with a unique purpose and design for maximum safety and efficiency when in use, especially when pressure is of great concern.


92  results were found

SearchResultCount:"92"

Sort Results

List View Easy View (new)

Rate These Search Results

Supplier: UPCHURCH SCIENTIFIC
Description: These ultra-low volume back pressure regulators (BPRs) are developed to minimise swept volume, which is especially important for multi-detector applications.

Supplier: UPCHURCH SCIENTIFIC
Description: For fine control of fluid flow rates, these valves can reduce outgoing flow. These needle valves are perfect for use with peristaltic pump fluid transfer applications, mass spectrometry and fraction collection. They can also be used to regulate gas flow in helium sparging lines and as a flow-dependent variable back pressure regulator.

Supplier: UPCHURCH SCIENTIFIC
Description: Pressure relief valves are ideal for preventing system over-pressurisation. These products protect system components by diverting fluid flow automatically when inline pressure exceeds the set limit.

Supplier: UPCHURCH SCIENTIFIC
Description: Stop a flow stream quickly with these shut-off valves. The bodies are manufactured from either PEEK or ETFE. Both versions feature a PCTFE rotor, making them highly resistant to chemicals. The blue colorant used in some valve configurations has proven not to leach out with common HPLC solvents.

Supplier: UPCHURCH SCIENTIFIC
Description: Upchurch Scientific®, V-101L right angle flow-switching valve, bulkhead version, 1/16" OD tubing, 1,0 mm thru-hole, 6,2 µl swept volume

Catalog Number: (NALG6120-0010)
Supplier: Thermo Fisher Scientific
Supplier Article Number:: 6120-0010
Description: These vacuum check valves with positive connector are designed to prevent back pressure with aspirator-type vacuum pumps.
UOM: 1 * 6 items

Environmentally Preferable


Supplier: UPCHURCH SCIENTIFIC
Description: Inline cartridge check valves are designed to limit flow in one direction and deliver a low cracking pressure. Ideal placement for these valves would be on the effluent side of the column to prevent post-column derivatisation agents from flowing back and poisoning the column if the HPLC mobile phase pump were to shut down.

Supplier: UPCHURCH SCIENTIFIC
Description: Designed to accurately split and control the low flow stream of a single incoming supply.

Catalog Number: (UPCHP-696)
Supplier: UPCHURCH SCIENTIFIC
Supplier Article Number:: P-696
Description: The Quick-Stop Luer check valve assembly is specifically designed to provide inline Luer connect/disconnect convenience while avoiding spills. It is made from biocompatible PEEK with gold-plated stainless steel spring.
UOM: 1 * 1 items


Supplier: UPCHURCH SCIENTIFIC
Description: These biocompatible PEEK and perfluoroelastomer inline check valves are designed for applications where low flow path volume is critical, such as delivery to lab-on-a-chip, single-cell analysis and micro- or nano-LC post-column derivatisation.

Supplier: UPCHURCH SCIENTIFIC
Description: Back pressure regulator assemblies are designed to create incremental back pressures ranging from 5 to 1000 psi (0,3 to 69 bar). These biocompatible and stainless steel back pressure regulator assemblies are available complete with a replaceable, factory pre-set cartridge (except the 5 and 20 psi (0,3 to 1,4 bar versions).

Catalog Number: (UPCHV-451)
Supplier: UPCHURCH SCIENTIFIC
Supplier Article Number:: V-451
Description: The 6-port medium pressure injection valves feature easy, external sample loop customisation. Simply clean-cut a piece of tubing that represents the volume of sample you wish to inject, taking into account the port-to-port volume of the valve.
UOM: 1 * 1 items


Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR at sales@sg.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +65 6505 0760.
81 - 92 of 92
no targeter for Bottom