You Searched For: Binder


281  results were found

SearchResultCount:"281"

Sort Results

List View Easy View (new)

Rate These Search Results

Supplier: Binder
Description: The KB series with compressor cooling consumes up to 30% less energy compared to its predecessor. Refrigerated incubators are mainly used for culturing tasks that need to be carried out at temperatures below room temperature or if high ambient temperatures cannot be avoided. The cooling system and the controllable fan guarantee high degrees of humidity even during cooling mode, or prolonged testing, to protect samples from drying out even when fully loaded.

Supplier: Binder
Description: RS422/RS232 interface converter

Supplier: Binder
Description: With forced convection, the Avantgarde.Line heating and drying chambers offer quality and process reliability. The wide temperature range of up to 300 °C, mean these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: Binder
Description: Access port with silicone plug, right, 50 mm, For: ED 56/115/260/720

Supplier: Binder
Description: Reinforced stainless steel rack, with fasteners (1 set of 4), For: MK/MKF/MKT/MKFT 115

Supplier: Binder
Description: Access port with 10 mm Ø silicone plug, at rear, For: BD,BF,ED,FD,FED,FP,M, FDL

Supplier: Binder
Description: Two versions of these incubators with electronically controlled APT.line™ preheating chamber are available depending on the application: The BD series with natural convection for all standard applications and the BF series with forced convection for applications with high load density.

Catalog Number: (BIND9010-0002)
Supplier: Binder
Supplier Article Number:: 9010-0002
Description: A compact device with hydraulic-mechanical control for precise, reliable incubation conditions. Optimum temperature range at 37 °C. Unit has galvanised sheet steel housing, powder coated throughout to afford maximum protection against corrosion, hydraulic-mechanical thermostat with analogue dial thermometer.
UOM: 1 * 1 items


Supplier: Binder
Description: Access port with silicone plugs, 50 mm, left side, MK, MKF, MKT, MFKT

Supplier: Binder
Description: Expansion rack, aluminium, For: VD 115

Catalog Number: (BIND9051-0025)
Supplier: Binder
Supplier Article Number:: 9051-0025
Description: Stacking adapter, for direct thermal decoupled stacking of 2 incubators, For: C 150
UOM: 1 * 1 items


Catalog Number: (BIND9020-0339)
Supplier: Binder
Supplier Article Number:: 9020-0339
Description: The KBW series plant growth chambers are precise units for plant cultivation under advanced working conditions. They provide perfect simulation of a wide range of growing environments. The units satisfy all requirements for optimum lighting and temperature conditions, so that culture processes can be defined and reproduced exactly. The design includes two or three variable position daylight cassettes with five daylight luminescence tubes each, which provides homogeneous light distribution. Units self-test for comprehensive status analysis.
UOM: 1 * 1 items


Catalog Number: (BIND4022-0123)
Supplier: Binder
Supplier Article Number:: 4022-0123
Description: The instrument tray is used for storing instruments during sterilisation processes.
UOM: 1 * 1 items


Catalog Number: (BIND1007-0141)
Supplier: Binder
Supplier Article Number:: 1007-0141
Description: Deep temperature gloves, medium size
UOM: 1 * 1 items


Supplier: Binder
Description: Shaker and controller equipped with LEMO connectors, For: CB 160, CB 220

Catalog Number: (BIND9051-0035)
Supplier: Binder
Supplier Article Number:: 9051-0035
Description: Stacking adapter, For: Direct thermal decoupled stacking of two CB 170 CO<sub>2</sub> incubators
UOM: 1 * 1 items


Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +65 6505 0760.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR at sales@sg.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +65 6505 0760.
1 - 16 of 281
no targeter for Bottom